PRACTICE TEST 1

Section III : Analytical Section

Time : 30 Minutes                                         Questions 25

 Directions : All questions are based on a passage or set of conditions. While answering a few of the questions, you would find it useful to draw a rough diagram. To answer any question, choose the answer you think is most appropriate among the given options.

Questions 1- 6

There are three on-off switches on a control panel A, B, and C. They have to be changed from an initial setting to a second setting according to the following conditions :
In case only switch A is the switch on in the initial setting , then turn on switch B.

In case switches A and B are the only switches on in the initial setting, then turn on switch C.
In case all the three switches are on initially setting, then turn off the switch C.
For any other initial setting, turn on all switches that are off and turn off all switches, if any, that are on.

1. In case in the initial setting is the switches A and B are on and the switch C is off, then what could be the second setting?

(A) A on, B on, C on.
(B) A on, B off, C on.
(C) A on, B off, C off.
(D) A off, B on, C off.
(E) A off, B off, C on.

2. In case switch B is the only switch on in the initial setting, what must be the second setting?

(A) A on, B on, C on.
(B) A on, B on, C off.
(C) A on, B off, C on.
(D) A off, B off, C on.
(E) A off, B off, C off.

Test 1

Section 1 : Verbal Section

Section 2 : Quantitative Section

Section 3 : Analytical Section

Section 4 : Quantitative Section

Section 5 : Verbal Section

Section 6 : Analytical Section

Section 7 : Verbal Section

Section 1 : Verbal Section

Section 2 : Quantitative Section

Section 3 : Analytical Section
Section 4 : Quantitative Section
Section 5 : Verbal Section

Section 6 : Analytical Section
Section 7 : Verbal Section